With the unprecedented number of tunnels under construction along the Eastern Seaboard of Australia, and with more planned over the next few years, industry professionals are on the lookout for new innovations that will overcome common tunnelling problems and speed up the tunnelling operation.
The water that accumulates within a tunnel creates a number of issues that would traditionally need to be managed in an ad hoc fashion to meet the needs of the day. Often this will involve adding on tanks and processes within the tunnel as site staff chase their tails trying to keep up with both water and mud that is produced as the tunnel progresses. Getting the water to the surface for treatment and discharge off-site can become an overwhelming focus.
This water is produced by both groundwater infiltration and the tunnelling processes themselves. The groundwater can be clean, but it can also contain high quantities of Iron and in some instances man-made contaminants that are a legacy from past industrial activities at the surface, adding to the complexity of water treatment that is required.
Managing the water appropriately both within the tunnel and at the surface is critical for ensuring uninterrupted operation. But to manage the water, you actually need to focus on solids.
Start with Solids at the Source
Removing water from the tunnel sounds simple enough. However, within the tunnel itself the problem becomes the solids within the water rather than the water itself. Long tunnels require multiple sumps and pumps, long pipe runs and finally a location where the water must be collected and transferred many tens of meters to the surface. Aside from the multiple locations where pits, pumps and pipes can block, the additional energy required to move the mass of solids within the water imposes a high energy demand on the process.
Once at the surface, these solids choke the water treatment process preventing off-site discharge occurring fast enough to keep ahead of the water building up in the tunnel.
To overcome reliability issues ‘fish tanks’ and sand separators have been tried along the length of the tunnels, with a view to reducing the ongoing problems with the pumping equipment and preventing overloading water treatment systems at the surface.
These ‘fish tanks’ are de-sludged to the tunnel stockpile which adds tons of water to the weight of the spoil that must be removed to the surface. More truck movements add to the project time and costs, and are another energy intensive practice adding to the carbon footprint of the project.
Rather than moving these solids with the water and coping with the issues that arise, removing the solids from the water within the tunnel and at the source protects the downstream processes and saves on wear and tear, power and labour.
Focus on Solids at the Treatment Plant
Traditional water treatment for tunnels involves an attempt to manage the inevitable solids followed by a clarification step. Sometimes additional treatment is required to ensure the quality is acceptable for discharge, or because a portion of reuse is desirable.
By tailoring the treatment plant to be robust against high solids loads there is a greater assurance that it will perform continuously in all situations.
Specifically, to target Iron and other contaminants requires a targeted chemical treatment regime. And to be effective without requiring high dosage rates as much of the solids as possible must be removed from the water stream prior to this chemical conditioning step. Providing a robust system in a compact footprint can be challenging.
A Holistic Approach
Hydroflux have taken a holistic approach and designed two complimentary treatment process for both in-tunnel solids management and water treatment at the surface.
The TunnelMATE® is a skid-mounted system that can be deployed into the tunnel to remove solids from waters streams and produce a dry and spadable cake – reducing labour, pumping energy, and pump wear and tear. The TunnelMAX® is a surface mounted modular treatment system designed to accommodate high solids loads if they occur and otherwise treat the water to a high quality for discharge – providing a compact, robust treatment-and-dewatering process in one system.
Both systems have been designed for automation, reliability and minimal operator input, and when used in combination on a site they are a highly effective total solids and water management solution.
TunnelMATE® systems can be configured for 50 – 500 kg/hr of dry solids, and TunnelMAX® systems can be configured for 2 – 50m3/hr of water treatment. Selection is site specific depending upon intended tunnelling methods, geology and groundwater infiltration rates – contact Hydrolfux for assistance in selecting a system to suit your needs.
About the Hydroflux Group
The Hydroflux Group comprises eleven companies based in Australia, New Zealand, the Pacific, and the UK, providing design and build, equipment, processes and operational services in water and wastewater treatment. Hydroflux Industrial specialises in industrial wastewater treatment including designing and constructing plants and supplying equipment across all sectors. Hydroflux Industrial is a member of the Hydroflux Group.
Hydroflux Industrial Pty Ltd
Level 26, 44 Market St. Sydney NSW 2000 Australia
P +61 2 9089 8833 F +61 2 9089 8830